eMachines E627 Service Guide - Page 99
LCD Module Reassembly Procedure, Replacing the Antennas - lcd replacement
View all eMachines E627 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
LCD Module Reassembly Procedure Replacing the Antennas 1. Replace the right Antenna as shown. Ensure that the locating pins on the Antenna are correctly seated. Locating Pin Locating Pin 2. Replace the adhesive strip to secure the Antenna 3. Run the cable down the side of the LCD Module in place. using all available clips and adhesive. 4. Run the cable along the cable channel as shown, using all available cable clips. Chapter 3 89
Chapter 3
89
LCD Module Reassembly Procedure
Replacing the Antennas
1.
Replace the right Antenna as shown. Ensure that the locating pins on the Antenna are correctly seated.
2.
Replace the adhesive strip to secure the Antenna
in place.
3.
Run the cable down the side of the LCD Module
using all available clips and adhesive.
4.
Run the cable along the cable channel as shown, using all available cable clips.
Locating Pin
Locating Pin