1993 Chevrolet Lumina Owner's Manual - Page 219

If you have too much brake the L A fluid, it can spill on engine. The fluid burn if the will engine is hot enough.You or others could be burned, and your vehicle could be damaged. Add brake fluid only when work done onthe is brake hydraulic system. p NOTICE I Replacing Brake System Parts The braking system a modern on vehicle is complex. many parts have Its to be of top quality and work well together if the vehicle is to have really good braking. Vehicleswe design and test have top-qualityGM brake parts in them, as your Chevrolet does when is it parts of your new. When you replace braking system-for example, when down and you your brake linings wear have to have new ones in-be sure put you get new genuine replacement GM parts. If you don't, your brakes no may longer work properly. For example, if someone puts in brake liningsthat are wrong for your vehicle, balance the between yourfront and rear brakes can change, forthe worse. The braking performance you've come expect can to change in many other ways if someone puts in the wrong replacement brake parts. to When your brake fluid falls a low level, your brake warning light will come on. See the Index under Brake System Warning Light. What to Add When you do need brake fluid, use only DOT-3 brake fluid-such as Delco Supreme 11@ Part (GM No. 1052535). Use new brake fluid from a sealed container only.