2010 Chevrolet Corvette Owner's Manual - Page 101
2010 Chevrolet Corvette Manual
Page 101 highlights
Programming Transmitters to the Vehicle Only keyless access transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer/retailer. The vehicle can be reprogrammed so that lost or stolen transmitters no longer work. Each vehicle can have up to four transmitters programmed to it. Programming with a Recognized Transmitter A new transmitter can be programmed to the vehicle when there is one recognized transmitter. For vehicles sold in Canada, two recognized transmitters are required to program a new transmitter. 1. The vehicle must be off. 2. Both the recognized and new transmitters must be with you. 3. Insert the vehicle key into the key cylinder located above the license plate. 4. Open the hatch/trunk. 5. Turn the key five times within five seconds. 6. The DIC displays READY FOR FOB #2, 3 or 4. 7. Place the new transmitter in the glove box transmitter pocket with the buttons facing the passenger side. 8. A beep sounds once programming in complete. The DIC displays READY FOR #3 or 4, or MAXIMUM NUMBER OF FOBS LEARNED. 9. To program additional transmitters, repeat Step 7. Press Acc. on the ignition switch if programming is complete. 10. Press K on each newly programmed transmitter to complete the process. 3-7