2010 Chevrolet Corvette Owner's Manual - Page 212

TRIP Button The TRIP button displays the odometer, trip distance, elapsed time, average speed, and oil life remaining information. Odometer: The odometer shows how far your vehicle has been driven in either kilometers or miles. Press the TRIP button to display odometer readings, such as: There is also a miles since last ignition feature that displays the number of kilometers (miles) driven since you last started the vehicle. Press and hold the RESET button for three seconds, then release it. The kilometers (miles) since the last ignition cycle will be set into the trip odometer. Elapsed Timer: Press the TRIP button until ELAPSED TIMER is displayed, such as ELAPSED TIMER .00. When the ignition is in on, the DIC can be used as a stopwatch. The display can show hours, minutes and seconds. The elapsed time indicator will record up to 23 hours, 59 minutes and 59 seconds, then it will reset to zero and continue counting. The display appears as ELAPSED TIMER .00 in the elapsed time function. You can start or stop the elapsed time by pressing the RESET button. To reset the elapsed time to zero, press the RESET button for three seconds while the timer is displayed. Pressing and holding the RESET button for at least 10 seconds will reset the timer display to the time since last ignition cycle. Average Speed: Press the TRIP button until the average speed is displayed, such as: • ODOMETER 20008 km or • ODOMETER 12345 MI You can also display the odometer by turning on the parking lamps. Trip Odometers: There are two trip odometers. Press the TRIP button to display TRIP ODOMETER A readings and press the button again to display TRIP ODOMETER B readings, such as: TRIP ODOMETER A 209.9 km or TRIP ODOMETER A 130.5 MI TRIP ODOMETER B 483.5 km or TRIP ODOMETER B 300.5 MI Both of the trip odometers can be used simultaneously. The trip odometers can be reset by pressing the RESET button on the DIC. • AVERAGE SPEED 100 km/h or • AVERAGE SPEED 62 MPH 4-50