2010 Chevrolet Corvette Owner's Manual - Page 36

Heated Seats On vehicles with heated seats, the buttons are located on the center console. The ignition must be on for this feature to work. The numbers on the back of the keyless access transmitters correspond to the numbers on the memory buttons. To save seating positions in the memory: 1. Adjust the driver's seat, both outside mirrors, and the telescopic steering column to a comfortable driving position. 2. Press and hold button 1 until two beeps let you know that the position has been stored in the memory. A second seating, mirror, and telescopic steering column position can be set by repeating the above steps and pressing button 2. To recall a memory position: L: 9: Press to turn the seat on at the high setting. Press again to turn it to the low setting Press to turn the system off. Memory Seat, Mirrors and Steering Wheel On vehicles with the memory package, the controls are located on the driver's door. 1: Saves the seating position for driver 1. 2: Saves the seating position for driver 2. • On vehicles with an automatic transmission, press and release the desired button. If the vehicle is in P (Park), a single beep sounds and the memory position is recalled after a brief delay. If the vehicle is not in P (Park), three beeps sound and the memory position is not recalled. B: Recalls the easy exit position. 2-4