2010 Chevrolet Corvette Owner's Manual - Page 363

Taillamps, Turn Signal, and Stoplamps To replace a stoplamp, taillamp/turn signal bulb: 1. Remove the screw from the top of the lamp assembly. 4. Pull the bulb straight out to remove it from the socket. 5. Push the new bulb in the bulb socket until it snaps into place. 6. Reinstall the lamp assembly by first lining up the tabs on the bottom of the lamp assembly with the tabs in the vehicle, then slide it in. 7. Replace the screw at the top of the lamp assembly. Replacement Bulbs Exterior Lamp Front Parking/Turn Signal/Daytime Running Lamp (DRL) Headlamp, High-Beam Lamp Sidemarker Lamp Stoplamp/Taillamp/Turn Signal Lamp Bulb Number 5702KA H9 W3W 3057KX For replacement bulbs not listed here, contact your dealer/retailer. 2. Tilt the lamp assembly toward you. 3. Turn the bulb socket one-quarter turn counterclockwise and pull it out. 6-61