2010 Chevrolet Corvette Owner's Manual - Page 262

Using the Re-dial Command 1. Press and hold b g for two seconds. The system responds with "Ready" followed by a tone. 2. After the tone, say "Re-dial". The system responds with "Re-dial using " and dials the last number called from the connected Bluetooth phone. Once connected, the person called will be heard through the audio speakers. • To ignore the incoming call, continue with the original call with no action. • Press c to disconnect the current call and switch to the call on hold. Three-Way Calling Three-Way Calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. 1. While on a call press b g . The system responds with "Ready" followed by a tone. 2. Say "Three-way call". The system responds with "Three-way call, please say dial or call". 3. Use the dial or call command to dial the number of the third party to be called. 4. Once the call is connected, press the callers together. Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. • Press b g and begin speaking to answer the call. • Press c to ignore a call. Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. b g to link all Ending a Call Press • Press b g to answer an incoming call when another call is active. The original call is placed on hold. c to end a call. • Press b g again to return to the original call. 4-100