2010 Chevrolet Corvette Owner's Manual - Page 37

• On vehicles with a manual transmission, when the vehicle is on, the parking brake needs to be set to recall the memory position. Press and release the desired button. A single beep sounds and the memory position is recalled after a brief delay. If the vehicle is on and the parking brake is not set, three beeps sound and the memory position is not recalled. For vehicles with the Auto Memory Recall, see "Auto Memory Recall" under DIC Vehicle Personalization on page 4-69 for more information. To stop recall movement of the memory feature, press one of the power seat controls, power mirror or memory buttons, or the telescopic steering column switch. This button is used to program and recall the desired driver's seat exit position. To program an exit position: 1. Recall the desired driving position by pressing button 1. 2. Adjust the seat and the telescopic steering column position to a comfortable exit position. 3. Press and hold the exit button until two beeps sound to let you know that the exit position is now programmed. A second exit position can be programmed by repeating the above steps and pressing button 2. To recall an exit position: • On vehicles with an automatic transmission, the vehicle needs to be in P (Park). • On vehicles with a manual transmission, the parking brake must be set. Easy Exit Seat B (Easy Exit Seat): B: Press to recall an exit position. One beep will sound and the exit position for the currently identified driver will be recalled. For vehicles with the Auto Exit Recall, see "Auto Exit Recall" under DIC Vehicle Personalization on page 4-69 for more information. 2-5