2013 Dodge Journey Owner Manual - Page 100

98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing A Child Restraint with a Switchable Automatic Locking Retractor (ALR) 1. 2. 3. 4. 5. To lock the seat belt, pull down on the shoulder part of the belt until you have pulled all the seat belt webbing out of the retractor. Then, allow the webbing to retract Place the child seat in the center of the seating back into the retractor. As the webbing retracts, you position. For some second row seats, you may need to will hear a clicking sound. This means the seat belt is recline the seat and/or raise the head restraint to get a now in the Automatic Locking mode. better fit. 6. Try to pull the webbing out of the retractor. If it is Pull enough of the seat belt webbing from the retractor locked, you should not be able to pull out any webto pass it through the belt path of the child restraint. bing. If the retractor is not locked, repeat step 5. Do not twist the belt webbing in the belt path. 7. Finally, pull up on any excess webbing to tighten the Slide the latch plate into the buckle until you hear a lap portion around the child restraint while you push "click." the child restraint rearward and downward into the vehicle seat. Pull on the webbing to make the lap portion tight against the child seat.