2013 Dodge Journey Owner Manual - Page 314

312 UNDERSTANDING YOUR INSTRUMENT PANEL Unless reset, this message will continue to display each time you cycle the ignition to the ON/RUN position. To turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance), perform the following procedure: Fuel Economy Press and release the UP or DOWN button until "Fuel Economy" displays highlighted in the EVIC and press the SELECT button. The following Fuel Economy functions will display in the EVIC: • Average Fuel Economy 1. Without pressing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the • Distance To Empty (DTE) ON/RUN position (Do not start the engine.) • Miles Per Gallon (MPG) 2. Fully depress the accelerator pedal, slowly, three times Average Fuel Economy within 10 seconds. Shows the average fuel economy since the last reset. 3. Without pressing the brake pedal, push the ENGINE When the fuel economy is reset, the display will read START/STOP button once to return the ignition to the "RESET" or show dashes for two seconds. Then, the OFF/LOCK position. history information will be erased, and the averaging will NOTE: If the indicator message illuminates when you continue from the last fuel average reading before the start the vehicle, the oil change indicator system did not reset. reset. If necessary, repeat this procedure.