2013 Dodge Journey Owner Manual - Page 396

394 STARTING AND OPERATING 3. If the shift lever is not in PARK, the ENGINE START/ STOP button must be held for two seconds and vehicle speed must be above 5 mph (8 km/h) before the engine will shut off. The ignition switch position will remain in the ACC position until the shift lever is in PARK and the button is pressed twice to the OFF position. If the shift lever is not in PARK and the ENGINE START/STOP button is pressed once, the EVIC (if equipped) will display a "Vehicle Not In Park" message and the engine will remain running. Never leave a vehicle out of the PARK position, or it could roll. ENGINE START/STOP Button Functions - With Driver's Foot OFF The Brake Pedal (In PARK Or NEUTRAL Position) The ENGINE START/STOP button operates similar to an ignition switch. It has four positions, OFF, ACC, RUN and START. To change the ignition switch positions without starting the vehicle and use the accessories follow these steps. • Starting with the ignition switch in the OFF position: • Press the ENGINE START/STOP button once to change the ignition switch to the ACC position (EVIC will display "ACC"), NOTE: If the ignition switch is left in the ACC or RUN (engine not running) position and the transmission is in • Press the ENGINE START/STOP button a second time PARK, the system will automatically time out after to change the ignition switch to the RUN position 30 minutes of inactivity and the ignition will switch to the (EVIC will display "ON/RUN"), OFF position.