2013 Dodge Journey Owner Manual - Page 238

236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pressing the RES (+) button once will result in a 1 mph (1.6 km/h) increase in set speed. Each subsequent tap of A soft tap on the brake pedal, pushing the CANCEL the button results in an increase of 1 mph (1.6 km/h). button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without To decrease speed while the Electronic Speed Control is erasing the set speed memory. Pressing the ON/OFF set, push the SET (-) button. If the button is continually button or turning the ignition switch OFF erases the set held in the SET (-) position, the set speed will continue to decrease until the button is released. Release the button speed memory. when the desired speed is reached, and the new set speed To Resume Speed will be established. To resume a previously set speed, push the RES (+) Pressing the SET (-) button once will result in a 1 mph button and release. Resume can be used at any speed (1.6 km/h) decrease in set speed. Each subsequent tap of above 20 mph (32 km/h). the button results in a decrease of 1 mph (1.6 km/h). To Vary The Speed Setting To Accelerate For Passing When the Electronic Speed Control is set, you can inPress the accelerator as you would normally. When the crease speed by pushing the RES (+) button. If the button pedal is released, the vehicle will return to the set speed. is continually pressed, the set speed will continue to increase until the button is released, then the new set speed will be established. To Deactivate