2013 Dodge Journey Owner Manual - Page 312

310 UNDERSTANDING YOUR INSTRUMENT PANEL If jump starting is required, refer to "Jump Starting • Engine Temperature Warning Light Procedures" in "What To Do In Emergencies". This light warns of an overheated engine condition. As temperatures rise and the gauge ap• Electronic Throttle Control (ETC) Light proaches H, this indicator will illuminate and a This light informs you of a problem with the single chime will sound after reaching a set threshold. Electronic Throttle Control (ETC) system. The Further overheating will cause the temperature gauge to light will come on when the ignition is first turned to ON/RUN and remain on briefly as a pass H, the indicator will continuously flash and a bulb check. If the light does not come on during starting, continuous chime will occur until the engine is allowed to cool. have the system checked by an authorized dealer. If a problem is detected, the light will come on while the If the light turns on while driving, safely pull over and engine is running. Cycle the ignition key when the vehicle stop the vehicle. If the A/C system is on, turn it off. Also, has completely stopped and the shift lever is placed in the shift the transmission into NEUTRAL and idle the vehicle. If the temperature reading does not return to PARK position. The light should turn off. If the light remains lit with the engine running, your vehicle normal, turn the engine off immediately and call for will usually be drivable. However, see an authorized dealer service. Refer to "If Your Engine Overheats" in "What To for service as soon as possible. If the light is flashing when Do In Emergencies" for more information. the engine is running, immediate service is required. You may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may require towing.