2012 Jeep Grand Cherokee User Guide - Page 112
2012 Jeep Grand Cherokee Manual
Page 112 highlights
WHAT TO DO IN EMERGENCIES Preparations for Jump-Start • The battery in your vehicle is located under the passengers front seat. There are remote locations under the hood to assist in jump starting. • Set the parking brake, shift the automatic transmission into PARK and turn the ignition to LOCK. • Turn off the heater, radio, and all unnecessary electrical accessories. • Remove the protective cover over the remote positive (+) battery post. Pull upward on the cover to remove it. • If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Jump-Starting Procedure • Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. • Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster battery. • Connect the negative end (-) of the jumper cable to the negative (-) post of the booster battery. • Connect the opposite end of the negative (-) jumper cable to the remote negative (-) post of the vehicle with the discharged battery. • Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. Once the engine is started, remove the jumper cables in the reverse sequence: • Disconnect the negative (-) jumper cable from the remote negative (-) post of the vehicle with the discharged battery. • Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster battery. • Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. • Disconnect the positive (+) end of the jumper cable from the remote positive (+) post of the discharged vehicle. • Reinstall the protective cover over the remote positive (+) battery post of the discharged vehicle. 110