2015 Jeep Grand Cherokee Owner Manual - Page 103

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Installing A Child Restraint With A Switchable Automatic Locking Retractor (ALR) 3. Slide the latch plate into the buckle until you hear a "click." 2 1. Place the child seat in the center of the seating 4. Pull on the webbing to make the lap portion tight position. For some second row seats, you may need to against the child seat. recline the seat and/or raise the head restraint to get a 5. To lock the seat belt, pull down on the shoulder part of better fit. If the rear seat can be moved forward and the seat belt until you have pulled all the seat belt rearward in the vehicle, you may wish to move it to its webbing out of the retractor. Then, allow the webbing rear-most position to make room for the child seat. to retract back into the retractor. As the webbing You may also move the front seat forward to allow retracts, you will hear a clicking sound. This means the more room for the child seat. seat belt is now in the Automatic Locking mode. 2. Pull enough of the seat belt webbing from the retractor 6. Try to pull the webbing out of the retractor. If it is to pass it through the seat belt path of the child locked, you should not be able to pull out any webrestraint. Do not twist the belt webbing in the belt bing. If the retractor is not locked, repeat step 5. path.