2015 Jeep Grand Cherokee Owner Manual - Page 163

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Linking And Unlinking The Remote Keyless Entry Transmitter To Memory 3. Once the profile has been recalled, press and release the SET (S) button on the memory switch. Your RKE transmitters can be programmed to recall one 4. Within five seconds, press and release button (1) or (2) of two pre-programmed memory profiles by pressing the accordingly. "Memory Profile Set" (1 or 2) will display UNLOCK button on the RKE transmitter. in the instrument cluster. NOTE: Before programming your RKE transmitters you 5. Press and release the LOCK button on the RKE must select the "Memory To FOB" feature through the transmitter within 10 seconds. Uconnect® system screen. Refer to "Uconnect® Settings " in "Understanding Your Instrument Panel" for further NOTE: Your RKE transmitters can be unlinked to your memory settings by pressing the SET (S) button, and information. within 10 seconds, followed by pressing the UNLOCK To program your RKE transmitters, perform the follow- button on the RKE transmitter. ing: Memory Position Recall 1. Cycle the vehicles ignition to the OFF position. NOTE: The vehicle must be in PARK to recall memory 2. Select a desired memory profile (1) or (2). positions. If a recall is attempted when the vehicle is not NOTE: If a memory profile has not already been set, in PARK, a message will be displayed in the Driver refer to ЉProgramming The Memory FeatureЉ in this Information Display (DID). section for instructions on how to set a memory profile. 3