2015 Jeep Grand Cherokee Owner Manual - Page 220

218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn the FCW system back ON, press the forward Changing FCW And Active Braking Status collision button again to turn the system ON (led turns The FCW Sensitivity And Active Braking Settings are off). programmable through the Uconnect® System. Refer to Changing the FCW status to "Off" prevents the system "Uconnect® Settings" in "Understanding Your Instrufrom warning you of a possible collision with the vehicle ment Panel" for further information. in front of you. The default status of FCW is the "Far" setting and the Changing the Active Braking status to "Off" prevents the system from providing limited autonomous braking, or additional brake support if the driver is not braking adequately in the event of a potential frontal collision. Active Braking is the "On" setting, this allows the system to warn you of a possible collision with the vehicle in front of you when you are farther away and it applies limited braking. This gives you the most reaction time to avoid a possible collision. NOTE: The FCW system state is kept in memory from one ignition cycle to the next. If the system is turned OFF, Changing the FCW status to the "Near" setting, allows the system to warn you of a possible collision with the it will remain off when the vehicle is restarted. vehicle in front of you when you are much closer. This setting provides less reaction time than the "Far" setting, which allows for a more dynamic driving experience.