2015 Jeep Grand Cherokee Owner Manual - Page 303

UNDERSTANDING YOUR INSTRUMENT PANEL 301 • Five Second Unstored Messages When the appropriate conditions occur, this type of message takes control of the main display area for five seconds and then returns to the previous screen. An example of this message type is "Automatic High Beams On." Engine Oil Life Reset Oil Change Required Unless reset, this message will continue to display each time you cycle the ignition to the ON/RUN position. To turn off the message temporarily, push and release the OK button. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure. Oil Change Reset Procedure 4 1. Without pushing the brake pedal, push and release the ENGINE START/STOP button and place the ignition Your vehicle is equipped with an engine oil change to the ON/RUN position (do not start the engine). indicator system. The "Oil Change Required" message 2. Fully push the accelerator pedal, slowly, three times will display in the DID for five seconds after a single within 10 seconds. chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system 3. Without pushing the brake pedal, push and release the is duty cycle based, which means the engine oil change ENGINE START/STOP button once to return the interval may fluctuate, dependent upon your personal ignition to the OFF/LOCK position. driving style.