2007 Mazda MAZDA3 Owner's Manual - Page 146

Mazda3_8V66-EA-06F_Edition2 Page145 Friday, May 26 2006 10:54 AM Black plate (145,1) Driving Your Mazda Starting and Driving NOTE To turn off the TCS, press the DSC OFF switch (page 5-24). Dynamic Stability Control (DSC) í The Dynamic Stability Control (DSC) automatically controls braking and engine torque in conjunction with systems such as ABS and TCS to help control side slip when driving on slippery surfaces, or during sudden or evasive maneuvering, enhancing vehicle safety. Refer to ABS (page 5-6) and TCS (page 5-22). qTCS/DSC Indicator Light This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. If the TCS or DSC is operating, the indicator light flashes. If the light stays on, the TCS or DSC may have a malfunction and they may not operate correctly. Take your vehicle to an Authorized Mazda Dealer. NOTE l DSC operation is possible at speeds greater than 20 km/h (12 mph). WARNING Do not rely on the dynamic stability control as a substitute for safe driving: The dynamic stability control (DSC) cannot compensate for unsafe and reckless driving, excessive speed, tailgating (following another vehicle too closely), and hydroplaning (reduced tire friction and road contact because of water on the road surface). You can still have an accident. In addition to the indicator light flashing, a slight lugging sound will come from the engine. This indicates that the TCS is operating properly. On slippery surfaces, such as fresh snow, it will be impossible to achieve high rpm when the TCS is on. l í Some models. 5-23 Form No.8V66-EA-06F