2007 Mazda MAZDA3 Owner's Manual - Page 44
2007 Mazda MAZDA3 Manual
Page 44 highlights
Mazda3_8V66-EA-06F_Edition2 Page43 Friday, May 26 2006 10:53 AM Black plate (43,1) Essential Safety Equipment Child Restraint 1. Make sure the seatback is securely latched by pushing it back until it is fully locked. 2. Secure the child-restraint system with the lap portion of the lap/shoulder belt. See the manufacturer's instructions on the child-restraint system for belt routing instructions. 3. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor. 4. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. Clicking from the retractor will be heard during retraction if the system is in the automatic locking mode. If the belt does not lock the seat down tight, repeat this step. NOTE Inspect this function before each use of the child-restraint system. You should not be able to pull the shoulder belt out of the retractor while the system is in the automatic locking mode. When you remove the child-restraint system, be sure the belt fully retracts to return the system to emergency locking mode before occupants use the seat belts. 5. If your child-restraint system requires the use of a tether strap, refer to the manufacturer's instructions to hook and tighten the tether strap after raising the head restraint (except center position). 2-29 Form No.8V66-EA-06F