2007 Mazda MAZDA3 Owner's Manual - Page 318
2007 Mazda MAZDA3 Manual
Page 318 highlights
Mazda3_8V66-EA-06F_Edition2 Page317 Friday, May 26 2006 10:55 AM Black plate (317,1) Maintenance and Care Owner Maintenance 3. Install the new bulb in the reverse order of removal. NOTE l 3. Unhook the bulb retaining spring. To replace the bulb, contact an Authorized Mazda Dealer. If the halogen bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. Use the protective cover and carton for the replacement bulb to dispose of the old bulb promptly and out of the reach of children. l l 4. Swing the retaining spring out and away to free the headlight bulb. 5. Carefully remove the headlight bulb from the socket by pulling it straight back. 6. Replace the bulb. 7. Install the new bulb in the reverse order of removal. NOTE l Low-beam bulb (Xenon fusion bulb) You cannot replace the low beam bulbs by yourself. The bulbs must be replaced at an Authorized Mazda Dealer. (Halogen bulbs) 1. Detach the electrical connector from the bulb by pulling it to the rear. To replace the bulb, contact an Authorized Mazda Dealer. If the halogen bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. Use the protective cover and carton for the replacement bulb to dispose of the old bulb promptly and out of the reach of children. When reinstalling the sealing cover, make sure faces up. l l l 2. Pull off the sealing cover. 8-43 Form No.8V66-EA-06F