2007 Mazda MAZDA3 Owner's Manual - Page 299
2007 Mazda MAZDA3 Manual
Page 299 highlights
Mazda3_8V66-EA-06F_Edition2 Page298 Friday, May 26 2006 10:55 AM Black plate (298,1) Maintenance and Care Owner Maintenance Automatic Transaxle Fluid (ATF) í qInspecting Automatic Transaxle Fluid Level The automatic transaxle fluid level should be inspected regularly. Measure it as described below. 5AT The level must be kept between MIN and MAX. l With turbocharger CAUTION Always check the automatic transaxle fluid level according to the following procedure. If the procedure is not done correctly, the automatic transaxle fluid level cannot be measured accurately which could lead to automatic transaxle damage. A low fluid level can cause transaxle slippage. Overfilling can cause foaming, loss of fluid, and transaxle malfunction. Use only the specified fluid. A nonspecified fluid could result in transaxle malfunction and failure. Visually examine the lines and hoses for leaks and damage. If new fluid is required frequently, consult an Authorized Mazda Dealer. l l 1. Park on a level surface and set the parking brake firmly. 2. Make sure there is no ATF leakage from the ATF hose or the housing. 3. Shift the shift lever to the park position (P), start the engine and warm it up. 8-24 í Some models. Form No.8V66-EA-06F