2007 Mazda MAZDA3 Owner's Manual - Page 157

Mazda3_8V66-EA-06F_Edition2 Page156 Friday, May 26 2006 10:54 AM Black plate (156,1) Driving Your Mazda Instrument Cluster and Indicators NOTE l (Standard meter) The odometer and trip meter can be displayed as follows even when the ignition switch is in the ACC or LOCK position. l When trip meter A is selected, pressing the selector again within one second will change to trip meter B mode. When trip meter A is selected, TRIP A will be displayed. When trip meter B is selected, TRIP B will be displayed. The trip meter records the total distance the vehicle is driven until the meter is again reset. Return it to "0.0" by holding the selector depressed for more than 1 second. Use this meter to measure trip distances and to compute fuel consumption. NOTE l l Displays for 10 minutes after the ignition switch is turned to the ACC or LOCK position from the ON position. Displays for 10 minutes after the driver's door is opened. l (Black-out meter) When the ignition switch is in the ACC or LOCK position, the odometer or trip meters cannot be displayed, however, pressing the selector button can inadvertently switch the trip meters or reset them during an approximate ten-minute period in the following cases: l Only the trip meters record tenths of kilometers (miles). The trip record will be erased when: l l l After the ignition switch is turned to the ACC or LOCK position from the ON position. After the driver's door is opened. l The power supply is interrupted (blown fuse or the battery is disconnected). The vehicle is driven over 999.9 km (mile). Odometer The odometer records the total distance the vehicle has been driven. Trip meter The trip meter can record the total distance of two trips. One is recorded in trip meter A, and the other is recorded in trip meter B. For instance, trip meter A can record the distance from the point of origin, and trip meter B can record the distance from where the fuel tank is filled. 5-34 Form No.8V66-EA-06F