2007 Mazda MAZDA3 Owner's Manual - Page 325

Mazda3_8V66-EA-06F_Edition2 Page324 Friday, May 26 2006 10:56 AM Black plate (324,1) Maintenance and Care Owner Maintenance NOTE 2. Disconnect the bulb by pulling it out. To replace the bulb, contact an Authorized Mazda Dealer. License plate lights 1. Wrap a flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with a flathead screwdriver. 2. Disconnect the bulb by pulling it out. 3. Install the new bulb in the reverse order of removal. Trunk light (4 Door) 1. Press both sides of the lens cap to remove it. Edge Edge 2. Disconnect the bulb by pulling it out. 3. Install the new bulb in the reverse order of removal. qReplacing Interior Light Bulbs Overhead light/Map lights (Front) í Due to the complexity and difficulty of the procedure, the bulbs should be replaced by an Authorized Mazda Dealer. Overhead light (Rear) 1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with the flathead screwdriver. 3. Install the new bulb in the reverse order of removal. 8-50 í Some models. Form No.8V66-EA-06F