2007 Mazda MAZDA3 Owner's Manual - Page 317
2007 Mazda MAZDA3 Manual
Page 317 highlights
Mazda3_8V66-EA-06F_Edition2 Page316 Friday, May 26 2006 10:55 AM Black plate (316,1) Maintenance and Care Owner Maintenance 3. Do the following procedure when replacing the left headlight bulb. Remove the clip, grasp the attached area of the slide mount and lift it upward, and then slide the slide mount to a position where it does not interfere with the frame. 4. Remove the strap and raise the air filter. Strap Clip 5. Find the high and low beam bulbs in the rear of the headlight unit. The outboard bulb is the LOW beam, and the inboard one is the HIGH beam. Refer to Light Bulbs on page 8-40. High-beam bulb 1. Turn the socket and bulb assembly counterclockwise and remove it. Carefully remove the headlight bulb from its socket in the reflector by gently pulling it straight backward out of the socket. 2. Disconnect the bulb from the electrical connector by pressing the tab on the connector with your finger and pulling the bulb upward. Slide mount Attached area Frame 8-42 Form No.8V66-EA-06F