2013 Nissan Murano Owner's Manual - Page 378

CRUISE CONTROL GUID-65CB3DFE-511B-4626-B4E4-906AB50ECAD1 PRECAUTIONS ON CRUISE CONTROL GUID-80F20175-468E-45AF-89B6-B813DC76FEBF . If the cruise control system malfunctions, it will cancel automatically. The CRUISE indicator light on the meter panel will then blink to warn the driver. If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically. If the CRUISE indicator light blinks, turn the cruise control main switch off and have the system checked by a NISSAN dealer. The CRUISE indicator light may blink when the cruise control main switch is turned ON while pushing the ACCEL/RES, COAST/ SET or CANCEL switch. To properly set the cruise control system, perform the following procedures. ... on winding or hilly roads on slippery roads (rain, snow, ice, etc.) in very windy areas . Doing so could cause a loss of vehicle control and result in an accident. . . SSD0694 1. 2. 3. 4. ACCEL/RES switch COAST/SET switch CANCEL switch MAIN (ON·OFF) switch CRUISE CONTROL OPERATIONS GUID-674D4903-B7FA-430D-83D5-F523C0724370 The cruise control allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your foot on the accelerator pedal. To turn on the cruise control, push the MAIN switch on. The CRUISE indicator light will illuminate. To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. Take your foot off the WARNING Do not use the cruise control when driving under the following conditions: . . when it is not possible to keep the vehicle at a set speed in heavy traffic or in traffic that varies in speed 5-30 Starting and driving