2013 Nissan Murano Owner's Manual - Page 382
2013 Nissan Murano Manual
Page 382 highlights
LOCK mode GUID-CC369E60-DA40-4EBF-A446-5E7381738F55 The AWD LOCK indicator light illuminate. The AWD LOCK indicator light will turn off. AWD mode Wheel driven AWD LOCK Use condiindica- tions tor light *3: will . LOCK mode will automatically be cancelled when the ignition switch is placed in the OFF position. ning. . Engine idling speed is high while warming up the engine. Be especially careful when starting or driving on slippery surfaces. When turning the vehicle in LOCK mode on paved roads, you may feel a braking effect. This is a normal condition of the AWD model. AUTO modeGUID-6EC36219-866B-4934-BDB0-3940B0EB298C . Distribution of torque to the front and rear wheels changes automatically, depending on road Turns AUTO conditions encounoff. tered [100:0] ↔ [50:50]. This results in improved driving stability.*1 AWD LOCK All-wheel drive*2, *3 LOCK *1: For driving on paved or slippery roads For driving on rough roads If the AWD LOCK switch is operated while accelerating or decelerating, or if the ignition switch is turned off, you may feel a jolt. This is normal. The oil temperature of power train parts will increase if the vehicle is continuously operated under conditions where the difference in rotation between the front and rear wheels is large (wheel slip), such as when driving the vehicle on rough roads through sand, mud or freeing a stuck vehicle. In these cases, the AWD warning light blinks rapidly and the AWD mode changes to 2WD to protect the powertrain parts. If you stop driving with the engine idling and wait until the warning light stops blinking, the AWD returns to the AUTO mode. . WARNING . When driving straight, shift the AWD LOCK switch to AUTO. Do not operate the AWD LOCK switch when making a turn or backing up. Do not operate the AWD LOCK switch with the front wheel spin- *2: When the rotation difference between the front and rear wheels is large, the AWD mode may change from AUTO to LOCK for a while, however, this is not a malfunction. LOCK mode will change to AUTO mode automatically when the vehicle has been driven at a high speed. The AWD LOCK indicator light turns off. . 5-34 Starting and driving