1998 Oldsmobile 88 Owner's Manual - Page 65

4. Press the LOCK button on the transmitter again. Each time the transmitter's LOCK button is pressed, the mode will advance by one, going from3 to 0 to 1, etc. Personalization Programming The delayed locking feature can be turned on or for off each driver's remote lock control transmitter. To turn the feature on: 1. Press and hold LOCK on the driver's power door lock this will switch throughout procedure. All the doors lock. 5 . Release the power door lock switch. The 2. Press the UNLOCK button on the transmitter. The lock automatic door locks will remain the most in delay isstill off and all doors will remain locked. recent mode selected. 3. Press the UNLOCK button on the transmitter again. This procedure changesthe mode for only the Lock delayis now active and all doors will unlock. transmitter used to change this setting. The procedure 4. Release the power door lock switch. will need to be repeated the second transmitter. for This procedure changes the mode only the for Delayed Locking transmitter used to change this setting. procedure The will need to be repeated the second transmitter. for This feature lets the driver delay the actual locking of the vehicle. When the power door lock switch is pressed If your vehicle is not equipped with the remote lock with the key removedfrom the ignition and the driver's control, use the following procedure turn the feature on: to door open, a chime will sound three times to signal that the lock delay mode is active. When all doors have been 1. With the ignition on, press and hold LOCK on the driver's power door lock switch. All doors will lock. closed, the doors will automatically afterfive lock seconds. If any door is opened before this, the 2. Toggle the headlamps switch four times (off to on is all five-second timer will reset itself oncethe doors one toggle). The doors will unlock too n f i i that c have been closed again. the featureis now on. Pressing the door lock switch twice within two seconds 3. Release the power door lock switch. will override this feature. To turn the feature off, repeat the previous procedures. Note: The door locks will cycle according to the mode entered while customizing memory door the locks. (Mode"0" has no feedback). 2-6