2009 Saturn VUE Owner's Manual - Page 117
2009 Saturn VUE Manual
Page 117 highlights
Instrument Panel Have the bulbs replaced. If a bulb is not burned out, check the fuse. See Fuses and Circuit Breakers on page 5-80 and for burned-out bulbs. 3-7 Flash-to-Pass This feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass. To flash the high beams from low beam, pull the turn signal/ multifunction lever all the way towards you. Then release it. Push up or pull down on the lever to place it in one of the following positions. 8 (Mist): Headlamp High/ Low-Beam Changer 2 3 Headlamp High/Low Beam Changer: Push the turn signal/ multifunction lever away from you to turn the high beams on. Pull the lever towards you to return to low beams. For a single wiping cycle. The lever returns to its starting position when released. For more cycles, hold the lever down before releasing it. Turns the wipers off. 9 (Off): Windshield Wipers & (Intermittent): Sets a delay between wipes. To set for a shorter or longer delay between wipes, move the switch on top of the lever left or right to decrease or increase wiper movement. a (Low): For slow, steady wiping cycles. This indicator light turns on in the instrument panel cluster when the high beam headlamps are on. The windshield wiper lever is located on the right side of the steering column. 1 (High): For rapid wiping cycles. Clear ice and snow from the wiper blades before using them. If the wiper blades are frozen to the windshield, gently loosen or thaw them.