2009 Saturn VUE Owner's Manual - Page 157
2009 Saturn VUE Manual
Page 157 highlights
Instrument Panel 4. To match additional transmitters at this time, repeat Step 3. Each vehicle can have a maximum of eight transmitters matched to it. 5. To exit the programming mode, you must cycle the key to LOCK/OFF. Compass Zone Setting This display allows for setting the compass zone. See DIC Compass on page 3-47 for more information. Compass Recalibration This display allows for calibrating the compass. See DIC Compass on page 3-47 for more information. Coolant Temperature Press the vehicle info button until the coolant temperature is displayed. The temperature will be shown in °F or °C depending on the units selected. If the coolant temperature display shows dashes instead of a value, there may be a problem with the vehicle. If this happens often, see your dealer/retailer for service. Battery Voltage Press the vehicle info button until the battery voltage is displayed. If the battery voltage display shows dashes instead of a value, there may be a problem with the vehicle. If this happens often, see your dealer/retailer for service. Blank Display This display shows no information. 3-47 DIC Compass Your vehicle may have a compass in the Driver Information Center (DIC). Compass Zone The zone is set to zone eight upon leaving the factory. Your dealer/retailer will set the correct zone for your location. Under certain circumstances, such as during a long distance cross-country trip or moving to a new state or province, it will be necessary to compensate for compass variance by resetting the zone through the DIC if the zone is not set correctly. Compass variance is the difference between the earth's magnetic north and true geographic north. If the compass is not set to the zone where you live, the compass may give false readings. The compass must be set to the variance zone in which the vehicle is traveling.