2009 Saturn VUE Owner's Manual - Page 120

3-10 Instrument Panel Setting Cruise Control { CAUTION If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. E (On/Off): Press to turn the cruise control system on and off. An indicator light comes on. RES+ (Resume/Accel): Move the thumbwheel up to resume a set speed or to accelerate to a higher speed. −SET (Set/Coast): Move the thumbwheel down to set a speed or to decrease the speed. To set a speed: 1. Press E to turn cruise control on. The indicator light on the button comes on. 2. Get to the speed desired. 3. Press the thumbwheel toward −SET and release it. 4. Take your foot off the accelerator pedal. Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied, the cruise control is disengaged. The indicator light on the instrument panel cluster goes out when the cruise is no longer engaged. To return to the previously set speed, press the thumbwheel up toward RES+ briefly when the vehicle has reached a speed of about 25 mph (40 km/h) or more. This accelerates the vehicle to the previously selected speed. Increasing Speed While Using Cruise Control To increase the cruise speed while using cruise control: • Move the thumbwheel up toward RES+ and hold it until the vehicle accelerates to the desired speed, and then release the switch. The cruise control buttons are located on the left side of the steering wheel. When the brakes are applied, the cruise control shuts off.