3Com 3CRWER100-75 User Guide - Page 45

Static DHCP, Assignment, DHCP Client Tab

Get 3Com 3CRWER100-75 - OfficeConnect Wireless 54 Mbps 11g Cable/DSL Router PDF manuals and user guides
UPC - 662705500089
View all 3Com 3CRWER100-75 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

LAN Settings 49 The LAN Settings screen is used to specify the LAN IP address of your Router, and to configure the DHCP server. 1 Select Unit Configuration and then specify the Router IP Address and Subnet Mask in the LAN Settings section. The default IP address of the Router is 192.168.1.1. 2 If you want to use the Router as a DHCP Server, check the Enable check box. 3 Clicking Auto Range will automatically choose the largest available range of addresses for your network. Alternatively, you can change the address range by changing the last digit(s) of the IP Pool Start Address, or the IP Pool End Address, or both. 4 If you use 3Com NBX telephones, enter the IP address of the NBX call processor at 3Com NBX Call Processor. 5 Check all of your settings, and then click Apply. The DHCP server will give out addresses to both wired and wireless clients. Static DHCP Figure 33 Static DHCP Assignment Screen Assignment DHCP Clients List Click on the DHCP Client Tab to display a list of all the DHCP clients in your network.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
LAN Settings
49
The LAN Settings screen is used to specify the LAN IP address of your
Router, and to configure the DHCP server.
1
Select
Unit Configuration
and then specify the Router
IP Address
and
Subnet Mask
in the LAN Settings section. The default IP address of the
Router is 192.168.1.1.
2
If you want to use the Router as a DHCP Server, check the
Enable
check
box.
3
Clicking
Auto Range
will automatically choose the largest available range
of addresses for your network. Alternatively, you can change the address
range by changing the last digit(s) of the
IP Pool Start Address, or
the
IP
Pool End Address,
or both.
4
If you use 3Com NBX telephones, enter the IP address of the NBX call
processor at
3Com NBX Call Processor
.
5
Check all of your settings, and then click
Apply
.
The DHCP server will give out addresses to both wired and wireless
clients.
Static DHCP
Assignment
Figure 33
Static DHCP Assignment Screen
Click on the
DHCP Client Tab
to display a list of all the DHCP clients in
your network.
DHCP Clients List