3Com 3CRWER100-75 User Guide - Page 63
Heart Beat Signal For Australia only, Heart Beat Signal password
UPC - 662705500089
View all 3Com 3CRWER100-75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Heart Beat Signal LAN Settings 67 Check with your ISP to make sure they support Heart Beat Signal. To set up the Router for use with a Heart Beat Signal connection, use the following procedure: 1 Select Heart Beat Signal (For Australia only) in the IP Allocation Mode field. 2 Enter the Host Name(optional). Some ISPs require a host name. If your ISP has this requirement, enter the host name in the Host Name text box. 3 Enter your Heart Beat Signal user name in the Heart Beat Signal User Name text box. 4 Enter your Heart Beat Signal password in the Heart Beat Signal Password text box. 5 Enter the MTU value supplied by your ISP. If you do not know this, leave it at the default value. The default is 1440. 6 Select an idle time from the Maximum Idle Time drop-down list. This value will correspond to the amount of idle time(no Internet activity)! that will pass before the Router automatically ends your PPTP session. Check all of your settings, and then click Save.