Adaptec AHA-2742T User Manual - Page 35
Installation
View all Adaptec AHA-2742T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
AHA-2740 Series User's Manual Installation This section is intended primarily for users who are new to SCSI peripherals, or have limited experience in installing an option board in their computer system. Note Experienced users may want to refer to the Quick Installation section described earlier in this chapter. The comprehensive instructions in this section guide you through terminating the SCSI bus, setting the SCSI ID, installing the host adapter, and connecting peripherals and cables. Once the host adapter is properly installed in your EISA system, you will have to configure it as explained in Chapter 3, Configuring the Host Adapter. To assist you with installation, Figure 2-1 shows the location of all the connectors on the host adapter. EXTERNAL LED CONNECTOR FLOPPY CONNECTOR (AHA-2740T/2742T ONLY) SCSI CHANNEL A INTERNAL CONNECTOR PIN 1 PIN 1 PIN 1 SCSI CHANNEL B INTERNAL CONNECTOR (AHA-2740T/2742T ONLY) SCSI CHANNEL A EXTERNAL CONNECTOR Figure 2-1. Connectors on the Host Adapter 2-8 Adaptec AHA-2740 Series User's Manual Stock Number: 510381-00 / Rev. C (Page 2-8) Print Spec Number: 491709-00 Rev C Current Date: 9/1/93 ECN Date: 9/14/93