Adaptec AHA-2742T User Manual - Page 41
SCSI Bus Activity LED Connector
View all Adaptec AHA-2742T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
AHA-2740 Series User's Manual SCSI Bus Activity LED Connector Most computer systems have a disk drive activity light, usually an LED (Light Emitting Diode) on the front panel. If you connect your system's LED cable to the host adapter, the LED will light to indicate data transfer on the SCSI bus. Note If you connect your computer's LED to the host adapter, the LED will no longer indicate non-SCSI disk activity. So you may not want to use this feature if you are running non-SCSI disk drives. To connect the SCSI bus LED connector: ® 1 Refer to your system's documentation to locate and unplug the LED cable from the connector on the system board. 2 Connect the LED cable to the SCSI activity LED connector (J1) on the host adapter as shown in Figure 2-5. Note On systems with a two position LED cable, connect the LED cable to pins 1 and 2 of the LED connector. LED CABLE 2-14 PIN 1 LED CONNECTOR Figure 2-5. SCSI LED Connector Adaptec AHA-2740 Series User's Manual Stock Number: 510381-00 / Rev. C (Page 2-14) Print Spec Number: 491709-00 Rev C Current Date: 9/1/93 ECN Date: 9/14/93