Adaptec AHA-2742T User Manual - Page 60

Host Adapter SCSI ID

Get Adaptec AHA-2742T - Storage Controller Fast SCSI 10 MBps PDF manuals and user guides View all Adaptec AHA-2742T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Configuring the Host Adapter Host Adapter SCSI ID Select Host Adapter SCSI ID to configure the SCSI ID (0-7) setting for the host adapter. Figure 3-6 displays your choices. The default setting is 7. Each installed SCSI device must have a unique SCSI ID. SCSI ID 7 is normally assigned to the host adapter; SCSI IDs 0 and 1 should be reserved for SCSI hard disk drives. If two host adapters are installed, each would have its own SCSI bus, thus each host adapter would still be set to SCSI ID 7. Refer to Chapter 2, Getting Started for additional information on SCSI ID. SCSI Channel A Configuration Host Adapter SCSI ID ( )7 ( )6 ( )5 ( )4 ( )3 ( )2 ( )1 ( )0 Done=F10 Figure 3-6. Selecting Host Adapter SCSI ID Adaptec AHA-2740 Series User's Manual Stock Number: 510381-00 / Rev. C (Page 3-9) Print Spec Number: 491709-00 Rev C Current Date: 9/1/93 ECN Date: 9/14/93 3-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
Host Adapter SCSI ID
Select
Host Adapter SCSI ID
to configure the SCSI ID (0-7)
setting for the host adapter. Figure 3-6 displays your choices. The
default setting is
7
.
Each installed SCSI device must have a unique SCSI ID. SCSI ID
7 is normally assigned to the host adapter; SCSI IDs 0 and 1
should be reserved for SCSI hard disk drives.
If two host adapters are installed, each would have its own SCSI
bus, thus each host adapter would still be set to SCSI ID 7. Refer
to Chapter 2,
Getting Started
for additional information on SCSI
ID.
SCSI Channel A Configuration
Host Adapter SCSI ID
(
) 7
(
) 6
(
) 5
(
) 4
(
) 3
(
) 2
(
) 1
(
) 0
Done=F10
<Edit Resources=F6>
<Cancel=ESC>
Figure 3-6.
Selecting Host Adapter SCSI ID
Adaptec AHA-2740 Series User’s Manual
Stock Number:
510381-00
/
Rev. C
(Page 3-9)
Print Spec Number:
491709-00 Rev C
Current Date:
9/1/93
ECN Date:
9/14/93
Configuring the Host Adapter
3-9