Adaptec AHA-2742T User Manual - Page 45
Connecting a Second Internal SCSI Device
View all Adaptec AHA-2742T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
AHA-2740 Series User's Manual 3 To connect a second internal SCSI device, plug the middle connector of the SCSI ribbon cable to the connector on the second internal SCSI device, as shown in Figure 2-8. PIN 1 COLORED STRIPE INTERNAL SCSI DEVICE TO 1ST INTERNAL SCSI DRIVE TO HOST ADAPTER Figure 2-8. Connecting a Second Internal SCSI Device 4 To connect three or more internal SCSI devices to a SCSI bus, obtain a 50-pin SCSI ribbon cable with enough connectors to accommodate all of your internal SCSI devices. Connecting External SCSI Devices The external connector for SCSI Channel A uses a 50-pin shielded cable with a high-density external connector. External cable connectors are keyed and can only be plugged-in one way; Pin 1 orientation is automatic. To connect external SCSI devices: ® 1 Connect one end of the external cable to the host adapter external connector, as shown in Figure 2-9. 2-18 Adaptec AHA-2740 Series User's Manual Stock Number: 510381-00 / Rev. C (Page 2-18) Print Spec Number: 491709-00 Rev C Current Date: 9/1/93 ECN Date: 9/14/93