Adaptec AHA-2742T User Manual - Page 64
Enter, Boot Device Only, All Devices, Disabled
View all Adaptec AHA-2742T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Configuring the Host Adapter BIOS Configuration BIOS Configuration allows you to configure the host adapter BIOS. Figure 3-12 displays your choices. Use the cursor keys to move between options. To toggle values for each option, press the Enter key. BIOS Configuration This configuration will affect BIOS only. ( ) Support Removable Disks as Fixed Disk .......Boot Device Only ( ) Extended Translation for Drives > 1 GByte Enabled ( ) Support More than two drives Disabled Figure 3-12. BIOS Configuration Selection Support Removable Disks as Fixed Disk This option allows you to configure removable media drives supported by the BIOS. The default setting is Boot Device Only. The following choices are available: Boot Device Only - Only the removable media drive designated as the boot device will be treated as a fixed disk. All Devices - All removable media drives supported by the BIOS will be treated as fixed disk drives. Disabled - No removable drives will be treated as fixed disks. Software drivers are needed for drives not controlled by the BIOS. Note Support for removable drives means only that the BIOS allows for use of a removable drive as if it were a fixed disk drive; it does not mean that the disk media can be removed during operation. Adaptec AHA-2740 Series User's Manual Stock Number: 510381-00 / Rev. C (Page 3-13) Print Spec Number: 491709-00 Rev C Current Date: 9/1/93 ECN Date: 9/14/93 3-13