Adaptec AHA-2742T User Manual - Page 47
Floppy Diskette Drives, AHA-2740 Series User's Manual
View all Adaptec AHA-2742T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
AHA-2740 Series User's Manual 3 To connect subsequent external SCSI devices, obtain additional external cables and chain each device to the previous device until all external SCSI devices have been connected, as shown in Figure 2-11. EXTERNAL SCSI DEVICES EXTERNAL SCSI CABLES Figure 2-11. Connecting Multiple External SCSI Devices Floppy Diskette Drives Floppy diskette drives connected to the floppy connector on the host adapter are not part of the SCSI bus; floppy diskette drives are controlled by the non-SCSI floppy diskette controller on the host adapter. Connecting Floppy Diskette Drives (AHA-2742/2742T Only) The floppy connector on the AHA-2742/2742T uses a 34-pin floppy ribbon cable with a 34-pin header connector. Make sure to maintain Pin 1 orientation as described in previous section Connecting Internal SCSI Devices. Note If you are not using the floppy controller on the AHA-2742/2742T, be sure to disable it by removing the jumper shunt on Jumper J4. 2-20 Adaptec AHA-2740 Series User's Manual Stock Number: 510381-00 / Rev. C (Page 2-20) Print Spec Number: 491709-00 Rev C Current Date: 9/1/93 ECN Date: 9/14/93