Alpine IVA W200 Owners Manual - Page 44
Phase Switching, Graphic Equalizer Adjustments
UPC - 793276200532
View all Alpine IVA W200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
0.5m 2.25m 5.1ms The sound is uneven because the distance between the listening position and the different speakers is different. The difference in the distance between the front left and rear right speakers is 1.75 meters (68-3/4"). Time correction eliminates the difference between the time required for the sound from the different speakers to reach the listening position. Setting the time correction of the front left speaker to 5.1 ms makes it possible to coordinate the distance from the listening position to the speaker. 5 Touch [SETUP] on the main source screen. The SETUP selection screen appears. 6 Touch [i-Personalize]. The i-Personalize screen appears. 7 Touch [ ] of A.PROCESSOR. The A.PROC list screen is displayed. 8 Touch [ ] or [ ] of T.CORR. Select L/R or L+R. L/R: L+R: Different adjustment values can be set for the left and right channels. Sets the same adjustment values for the left and right channels. 9 Touch [ ] of T.CORR. The T.CORR adjustment screen appears. 10 Adjust the time correction value (0.0 ~ 20.0ms) of a desired speaker by touching the respective [ ] or [ ] button (1 step = 0.05ms). 11 Touch [RETURN] to return to the previous screen. • When the speaker is set to the "OFF" mode, the TCR for that speaker cannot be set. Refer to "Setting the Speakers" (page 40). • The adjustment value for FRONT2 (Speakers) which is adjusted in time correction, is also applied to the front speakers in "Setting Bass Focus" (page 44). • The adjustment (AUTO TCR) cannot be automatically set on this unit. Phase Switching 1 Make sure that the defeat is turned off (page 24). 2 Touch [SETUP] on the main source screen. The SETUP selection screen is displayed. 3 Touch [i-Personalize]. The i-Personalize screen appears. 4 Touch [ ] of A.PROCESSOR. The A.PROC list screen is displayed. 5 Touch [ ] of PHASE. The PHASE adjustment screen appears. 6 Switch the phase (0° or 180°) by touching [ ] or [ ] of the desired speaker. 7 Touch [RETURN] to return to the previous screen. Graphic Equalizer Adjustments The graphic equalizer allows you to modify the sound using 31 bands each for the front (left and right), rear (left and right) and center speakers. An additional 10 bands are available for the subwoofer. This allows you to customize the sound to suit your taste. 1 Check that the Defeat mode is off. 2 Touch [SETUP] on the main source screen. The SETUP selection screen appears. 3 Touch [i-Personalize]. The i-Personalize screen will appear. 4 Touch [ ] of A.PROCESSOR. The A.PROC list screen appears. 5 Select L/R or L+R by touching [ ] or [ ] of G-EQ. L/R: L+R: Different adjustment values can be set for the left and right channels. Sets the same adjustment values for the left and right channels. When parametric EQ is adjusted, this setting will be turned off. 6 Touch [ ] of G-EQ. The G-EQ list screen appears. 7 Touch [ ] of the desired speaker (channel). The G-EQ adjustment screen appears. 42-EN