Asus A7V400-MX SE A7V400-MX SE user's manual for English version - Page 48

[Manual] and [CHS] Settings Primary IDE Master Primary IDE Master Access Mode [Manual] [CHS] Capacity 40020 MB Cylinder Head Sector PIO Mode UDMA Mode Transfer Mode [19158] [ 16] [ 255] [ Auto] [ Auto] UDMA 4 Select Menu Item Specific Help Press [Enter] to select sector addressing method. F1 : Help ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults ESC : Exit →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit Manually enter the number of cylinders, heads and sectors per track for the drive. Refer to the drive documentation or the drive label for this information. After entering the IDE hard disk drive information into BIOS, use a disk utility, such as FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk. Make sure to set the partition of the Primary IDE hard disk drives to active. After making your selections on this sub-menu, press the key to return to the Main menu. The Main menu displays the hard disk drive field with your configuration. Access Mode [Auto] Select the hard disk drive type from this field. When Logical Block Addressing (LBA) is enabled, the 28-bit addressing of the hard drive is used without regard for cylinders, heads, or sectors. Note that LBA Mode is necessary for drives with more than 504 MB storage capacity. Select [CHS] to make manual entries for configuring the fields below. Configuration options: [CHS] [LBA] [Large] [Auto] Capacity Displays the hard disk drive capacity in MB or GB. This item is non-configurable. Cylinder Configures the number of cylinders. Refer to the drive documentation to determine the correct value. 2-12 Chapter 2: BIOS setup