Asus A7V400-MX SE A7V400-MX SE user's manual for English version - Page 54

AGP Bridge Configuration AGP Bridge Configuration Graphics Aperture Size AGP Mode AGP Driving Control AGP Driving Value AGP Fast Write Onboard Video Memory [64M] [4X] [Auto] DA [Disabled] [32M] Select Menu Item Specific Help Select AGP aperture size. F1 : Help ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults ESC : Exit →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit Graphics Aperture Size [64MB] Sets the size of mapped memory for AGP graphic data. Configuration options: [256M] [128M] [64M] [32M] [16M] [8M] [4M] [1G] [512M] AGP Mode Sets the AGP transfer mode. AGP 4X transfers video data at 1066 MB/s and is backward compatible with AGP 1X and 2X AGP cards. When set to [1X], the AGP interface only provides a peak data throughput of 266 MB/s, even if you are using an AGP 4X card. Configuration options: [1X] [2X] [4X] The AGP Mode automatically adjusts to 8X when you install an AGP 8X card. AGP Driving Control [Auto] Allows you to automatically select or manually assign the AGP Driving Value. Configuration options: [Auto] [Manual] AGP Driving Value [DA] This item is enabled when you set the AGP Driving Control to [Manual]. Press to assign a hexadecimal AGP Driving Value. Configuration options: [Min = 0000, Max = 00FF] AGP Fast Write [Disabled] Enables or disables the AGP Fastwrite function. Configuration options: [Disable] [Enabled] Onboard Video Memory [32M] Allows you to set the share memory size for the onboard VGA. Configuration options: [16M] [32M] [64M] 2-18 Chapter 2: BIOS setup