Asus A7V400-MX SE A7V400-MX SE user's manual for English version - Page 60

2.6.1 APM Configuration APM Configuration PS2KB Wakeup Select PS2KB Wakeup Password PS2KB Wakeup from S3/S4/S5 PS2MS Wakeup from S3/S4/S5 USB Resume from S3/S4 Power On By PCI Devices Modem Ring Resume Power On By RTC Alarm Date (of Month) Resume Time (hh:mm:ss) Video Off Option PWR Button < 4 secs Restore on AC Power Loss [Hot Key] Clear [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] 0 0 : 0 : 0 [Suspend -> Off] [Instant-Off] [Last State] Select Menu Item Specific Help Select wakeup by PS2KB, Hot key, or Password. F1 : Help ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults ESC : Exit →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit PS2KB Wakeup Select [Hot Key] Allows you to use specific keys on the keyboard to turn on the system. This feature requires an ATX power supply that provides at least 1 A on the +5VSB lead. Configuration options: [Hot key] [Password] PS2KB Wakeup Password [Clear] Appears when you select password as the wakeup method for the PS/2 keyboard. Highlight this item then press to enter an 8-digit password. When the password is activated, the system wakes up from a keyboard stroke only after you enter the correct password. To disable the password, highlight this item again, then press twice. A PASSWORD DISABLED! message appears indicating that you have successfully disabled the password. The PS2KB Wakeup from S3/S4/S5 and thePS2MS Wakeup from S3/S4/ S5 are not configurable if you set the PS2KB Wakeup Select item to password mode. PS2KB Wakeup from S3/S4/S5 [Disabled] When set to [Enabled], this parameter allows you to use the PS/2 keyboard to turn on the system. Configuration options: [Disabled] [Ctrl+F1] [Ctrl+F2] [Ctrl+F3] [Ctrl+F4] [Ctrl+F5] [Ctrl+F6] [Ctrl+F7] [Ctrl+F8] [Ctrl+F9] [Ctrl+F10] [Ctrl+F11] [Ctrl+F12] [Power] [Wake] [Any Key] 2-24 Chapter 2: BIOS setup