Asus NCCH-DL Disk Array & Driver Installation Guide English Version - Page 21

1.5.6 Rebuilding a RAID set The utility displays the condition of the RAID set during the POST. When a RAID set is degraded, you can use the utility to rebuild it. Check the physical connections of the SATA hard disk drives before you rebuild a degraded RAID set. Check the system and motherboard user guide for additional information. To rebuild a RAID array: 1. Enter the Adaptec RAID Configuration Utility following the instructions in the section "Creating a RAID 0 (Stripe)." 2. Select A r r a y C o n f i g u r a t i o n U t i l i t y from the initial menu, then press . 3. From the main menu, highlight Manage Arrays, then press to display the installed RAID sets. 4. Highlight the degraded RAID set, then press to display the array properties. The A r r a y S t a t u s shows DEGRADED. RAID configuration and driver installation 21