Asus NCCH-DL Disk Array & Driver Installation Guide English Version - Page 39

Rebuilding a RAID 1 set

Get Asus NCCH-DL PDF manuals and user guides View all Asus NCCH-DL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

1.6.6 Rebuilding a RAID 1 set The R e b u i l d A r r a y M e n u allows you to rebuild a RAID 1 set and recover the array from errors. During POST, the FastTrak S150 TX4™ BIOS checks and displays the RAID 1 condition. The screen displays the following information if the BIOS detected an error on the array. To rebuild the array: 1. Press + to enter the FastBuild™ Utility. 2. From the FastBuild™ Utility main menu, press to display the D e f i n e A r r a y M e n u. 3. Select the failed array, then identify the failed drive channel and ID. 4. Exit the utility, then turn off the system. 5. Replace the failed drive with an identical (same storage capacity) drive. RAID configuration and driver installation 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
RAID configuration and driver installation
RAID configuration and driver installation
RAID configuration and driver installation
RAID configuration and driver installation
RAID configuration and driver installation
39
39
39
39
39
1.6.6
1.6.6
1.6.6
1.6.6
1.6.6
Rebuilding a RAID 1 set
Rebuilding a RAID 1 set
Rebuilding a RAID 1 set
Rebuilding a RAID 1 set
Rebuilding a RAID 1 set
The Rebuild Array Menu
Rebuild Array Menu
Rebuild Array Menu
Rebuild Array Menu
Rebuild Array Menu allows you to rebuild a RAID 1 set and recover
the array from errors. During POST, the FastTrak S150 TX4
™
BIOS checks
and displays the RAID 1 condition. The screen displays the following
information if the BIOS detected an error on the array.
3.
Select the failed array, then identify the failed drive channel and ID.
4.
Exit the utility, then turn off the system.
5.
Replace the failed drive with an identical (same storage capacity) drive.
To rebuild the array:
1.
Press <Ctrl> + <F> to enter the FastBuild
™
Utility.
2.
From the FastBuild
™
Utility main menu, press <3> to display the
Define Array Menu
Define Array Menu
Define Array Menu
Define Array Menu
Define Array Menu.