Belkin KVM over IP User Manual - Page 26

Daisy-Chaining Multiple KVM Switches Optional - smb switch

Get Belkin KVM over IP - Omniview SMB 1x16 Switch KVM PDF manuals and user guides
UPC - 722868596104
View all Belkin KVM over IP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

section Local Installation Daisy-Chaining Multiple KVM Switches (Optional) 1 Note: If you are only installing a single SMB KVM-over-IP Switch, skip to the "Remote Installation" section on page 28. 2 You can daisy-chain up to 15 additional OmniView SMB and PRO2 KVM Switches to your OmniView SMB KVM-over-IP Switch, allowing a server 3 administrator to manage up to a maximum of 256 servers from one local or remote console. Each daisy-chained KVM Switch is referred to as a "BANK" and 4 is assigned an address. The SMB KVM-over-IP Switch connected to the console keyboard, mouse, and monitor can only function as the "primary" KVM switch. BANKs 01 through 15 are referred to as "secondary" KVM switches. 5 Note: The SMB KVM-over-IP Switch can only function as the primary KVM switch. You cannot daisy-chain two SMB KVM-over-IP Switches together. 6 Note: A Daisy-Chain Cable (F1D108-CBL-XX) is required to daisy-chain each KVM Switch and is available through your Belkin reseller, or online at 7 www.belkin.com (U.S. only). 8 How to Assign a BANK Address All SMB CAT5 and PRO2 KVM Switches feature a "BANK DIP" switch. The 9 "BANK DIP" switch is used to assign the proper BANK address to each KVM Switch. 10 • For a multiunit configuration, the "BANK DIP" switch for each secondary unit must be set to a unique BANK address (from 01 through 15). For SMB CAT5 KVM Switches, refer to the chart on page 24 for "BANK DIP" switch settings. For PRO2 KVM Switches, refer to the PRO2 User Manual for "BANK DIP" switch settings. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
23
1
2
3
4
5
6
7
8
9
10
section
Local Installation
Daisy-Chaining Multiple KVM Switches (Optional)
Note: If you are only installing a single SMB KVM-over-IP Switch, skip
to the “Remote Installation” section on page 28.
You can daisy-chain up to 15 additional OmniView SMB and PRO2 KVM
Switches to your OmniView SMB KVM-over-IP Switch, allowing a server
administrator to manage up to a maximum of 256 servers from one local or
remote console. Each daisy-chained KVM Switch is referred to as a “BANK” and
is assigned an address. The SMB KVM-over-IP Switch connected to the console
keyboard, mouse, and monitor can only function as the “primary” KVM switch.
BANKs 01 through 15 are referred to as “secondary” KVM switches.
Note: The SMB KVM-over-IP Switch can only function as the primary KVM
switch. You cannot daisy-chain two SMB KVM-over-IP Switches together.
Note:
A Daisy-Chain Cable (F1D108-CBL-XX) is
required
to daisy-chain
each KVM Switch and is available through your Belkin reseller, or online at
www.belkin.com
(U.S. only).
How to Assign a BANK Address
All SMB CAT5 and PRO2 KVM Switches feature a “BANK DIP” switch. The
“BANK DIP” switch is used to assign the proper BANK address to each
KVM Switch.
• For a multiunit configuration, the “BANK DIP” switch for each secondary unit
must be set to a unique BANK address (from 01 through 15). For SMB CAT5
KVM Switches, refer to the chart on page 24 for “BANK DIP” switch settings.
For PRO2 KVM Switches, refer to the PRO2 User Manual for “BANK DIP”
switch settings.