Belkin KVM over IP User Manual - Page 56
Auto Video Adjust
UPC - 722868596104
View all Belkin KVM over IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
section Using the Switch from a Remote Console 1 2 3 4 5 6 7 Fig. 18 Manual Video-Adjust Bar 8 Auto Video Adjust 9 To adjust the video automatically: 1. Open Internet Explorer (or similar) in the background. 10 2. In the quick-access toolbar, click . 3. Select "Auto video adjust". The process will take a few seconds. If the process runs for more than three seconds, there may be an abnormal noise level. Check the video cable and verify that no dynamic-video application is running on the target server's desktop. Perform this procedure where necessary for each target server or new screen resolution. 53
53
1
2
3
4
5
6
7
8
9
10
section
Using the Switch from a Remote Console
Fig. 18 Manual Video-Adjust Bar
Auto Video Adjust
To adjust the video automatically:
1.
Open Internet Explorer (or similar) in the background.
2.
In the quick-access toolbar, click
.
3.
Select “Auto video adjust”.
The process will take a few seconds. If the process runs for more than three
seconds, there may be an abnormal noise level. Check the video cable and verify
that no dynamic-video application is running on the target server’s desktop.
Perform this procedure where necessary for each target server or new
screen resolution.