Belkin KVM over IP User Manual - Page 74
Troubleshooting - solution
UPC - 722868596104
View all Belkin KVM over IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Troubleshooting section Local Console 1 General Problem: 2 My server does not boot when connected to the Switch but works fine when I connect the keyboard, video, and mouse directly to the server. 3 Solution: • Make sure that the keyboard and mouse cables are connected tightly between 4 the Server Interface Module and the server. • Check that the keyboard and mouse cables are not crossed. 5 • Check the CAT5 cable connection. 6 Video Problem: 7 I am getting ghosting, shadowing, or fuzzy images on my local monitor. Solution: 8 • Check that all video cables are inserted properly to the Server Interface Module. 9 • Check that the monitor you are using supports the resolution and refresh-rate setting on your server. 10 • Lower the video resolution of your monitor. • Check that the cable length does not exceed 100 feet (30m). • Check that the graphics card you are using supports the resolution and refresh-rate setting on your server. • Connect the monitor directly into the server with which you are having trouble to see if the problem still appears. Problem: I am getting a black screen on my local monitor. Solution: • Check that all video cables are inserted properly. • Check that the keyboard cable is connected and inserted properly between the server and the Server Interface Module for the appropriate port. • Connect your monitor directly to the server to verify that your monitor is functioning properly. 71