Belkin KVM over IP User Manual - Page 29

Getting Started, Connecting the Primary and Secondary KVM Switches - 8 port

Get Belkin KVM over IP - Omniview SMB 1x16 Switch KVM PDF manuals and user guides
UPC - 722868596104
View all Belkin KVM over IP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Local Installation Getting Started: 1. Make sure that all servers and Switches are powered off and that each KVM Switch has been assigned a unique BANK address. 2. Place the SMB KVM-over-IP Switch and all secondary KVM Switches in the desired location. 3. Connect the console monitor, keyboard, and mouse to the console ports of the SMB KVM-over-IP Switch. Refer to "Connecting the Console to the Switch" on page 14. Connecting the Primary and Secondary KVM Switches: 1. Using the Daisy-Chain Cable (F1D108-CBL-XX), connect one end to the "Daisy-Chain" port on the SMB KVM-over-IP Switch. 2. Connect the other end of the Daisy-Chain Cable to the "Primary Input/ Secondary Output" port of the first secondary KVM Switch (BANK 01). 3. To add secondary units, connect one end of the Daisy-Chain Cable to the "Secondary Input" on the first secondary KVM Switch and the other end to the "Primary Input/Secondary Output" port of the next secondary KVM Switch (for example, BANK 01). 4. Repeat step 3 for additional KVM Switches you wish to add to your daisy-chain configuration. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
26
26
Local Installation
Getting Started:
1.
Make sure that all servers and Switches are powered off and that each
KVM Switch has been assigned a unique BANK address.
2.
Place the SMB KVM-over-IP Switch and all secondary KVM Switches in the
desired location.
3.
Connect the console monitor, keyboard, and mouse to the console ports
of the SMB KVM-over-IP Switch. Refer to “Connecting the Console to the
Switch” on page 14.
Connecting the Primary and Secondary KVM Switches:
1.
Using the Daisy-Chain Cable (F1D108-CBL-XX), connect one end to the
“Daisy-Chain” port on the SMB KVM-over-IP Switch.
2.
Connect the other end of the Daisy-Chain Cable to the “Primary Input/
Secondary Output” port of the first secondary KVM Switch (BANK 01).
3.
To add secondary units, connect one end of the Daisy-Chain Cable to the
“Secondary Input” on the first secondary KVM Switch and the other end
to the “Primary Input/Secondary Output” port of the next secondary KVM
Switch (for example, BANK 01).
4.
Repeat step 3 for additional KVM Switches you wish to add to your
daisy-chain configuration.