Belkin KVM over IP User Manual - Page 40
To specify and name servers, Installing new Switch-Definition Files SDFs
UPC - 722868596104
View all Belkin KVM over IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
section Remote Installation To specify and name servers: 1. Click next to the Daisy-Chain field and select the KVM-switch 1 configuration that best suits your configuration. 2. Click . The number of possible connected servers will appear in the 2 Server Name section. 3. Change the name of each connected server by highlighting the server and 3 typing in a new name. 4. Click . to save the changes. 4 Note: You will need to change the name of every server you want to access. Server names left as "UNUSED" cannot be accessed. 5 6 Installing new Switch-Definition Files (SDFs) If your switch-configuration type is not listed in the Daisy-Chain drop-down list, 7 contact Belkin Technical Support at (800) 282-2355 to request an updated SDF with the desired KVM-configuration list. 8 To install the SDF: 1. Load the file onto the client computer. 9 2. Click to locate the new SDF. 3. Click "Install" to update the Switch with the new file. 10 Note: If you change the hot-key sequence in the local OSD to "Print Screen", "Ctrl", or "F12", you must load a new switch-definition file (SDF) for the corresponding hot key. The SDF can be downloaded from www.belkin.com/support. 37